Store

No products in the cart.

Store
Home » Store » Accessories » 0.96″ OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
🔍
0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
  1. 0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
  2. 0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
  3. 0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)
  4. 0.96" OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)

Accessories

1.14-inch TFT Color LCD Module, IPS Wide Viewing Angle, SPI Interface, ST7789 Driver (135×240 / 3.3V / 8-Pin)
1.14-inch TFT Color LCD Module, IPS Wide Viewing Angle, SPI Interface, ST7789 Driver (135×240 / 3.3V / 8-Pin)
$3.90
+
1.54-inch TFT Color LCD Module, IPS Full Viewing Angle, SPI Interface, 240×240 Resolution, ST7789 (3.3V / 8-Pin)
1.54-inch TFT Color LCD Module, IPS Full Viewing Angle, SPI Interface, 240×240 Resolution, ST7789 (3.3V / 8-Pin)
$4.50
+

0.96″ OLED Display Module, I2C Interface, SSD1315 Driver (128×64 / 3.3V–5V / 4-Pin / Ultra-High Contrast)

$3.00

  • Self-Emissive OLED Display：No backlight required, delivering true black levels and high contrast in all lighting conditions.
  • Ultra-Low Power Consumption: Consumes power only when pixels are lit, ideal for battery-powered IoT and embedded systems.
  • Compact 128×64 Resolution: Suitable for text, icons, and status display in constrained embedded environments.
  • I2C Interface (4-Pin): Minimal wiring using VCC, GND, SCL, SDA — reduces GPIO usage on MCU.
  • SSD1315 Driver (SSD1306 Compatible): Fully compatible with most SSD1306 libraries for easy integration.

Includes jumper wires for fast prototyping and direct connection to development boards.

SKU: 63.700.000019 Category:

Pay with Ease

Apple Pay

Fast International Shipping

30-Day Money-Back Guarantee

Hassle-free Warranty

Lifetime Customer Support

    Overview

    This 0.96-inch OLED display module features a 128×64 monochrome panel driven by the SSD1315 controller, offering high contrast and ultra-low power consumption.

    With a simple I2C interface, it is widely used in IoT nodes, portable electronics, and embedded status displays.

    Why Choose This OLED Module?

    • Self-Emissive Technology: No backlight required — delivers deep blacks, high contrast, and thinner design.
    • Built for Low-Power Systems: Optimized for battery-powered applications such as remote sensors and wearable devices.
    • Minimal Wiring, Maximum Efficiency: 4-pin I2C interface reduces complexity and speeds up development.
    • Reliable & Stable Display Driver: SSD1315 improves display consistency while maintaining compatibility with existing codebases.

    Typical Applications

    • IoT sensor nodes (temperature, humidity, status display)
    • Battery-powered embedded systems
    • Arduino / ESP32 development projects
    • Portable electronics status indicators
    • CamThink sensor extension display

    Works with CamThink Systems

    • Compatible with CamThink MCU-based sensor expansion boards
    • Suitable for ultra-low-power edge deployments (event-triggered display)
    • Ideal for NE101-based status display extensions
    • Supports integration via I2C with custom firmware

    Specifications

    Item Parameter
    Display Type 0.96″ OLED Passive Matrix
    Resolution 128 × 64
    Interface I2C (IIC)
    Driver IC SSD1315
    Voltage 3.0V – 3.3V (logic)
    Module Size 24.7 × 27 × 11.3 mm
    Active Area 21.74 × 10.86 mm
    Viewing Angle Full Viewing Angle

    Pin Definition (4-Pin)

    Pin Name Description
    1 GND Ground
    2 VDD Power (3.3V recommended)
    3 SCL I2C Clock
    4 SDA I2C Data

    Notes & Tips

    • Compatible with most SSD1306 libraries — minimal code changes required
    • Ensure I2C pull-up resistors are present (on-board or external)
    • Avoid static content for long periods to reduce OLED burn-in
    • Consider screen refresh or inversion strategies for long-term use

    Package

    • 1× 0.96″ OLED Display Module
    • 1× 4-Pin Header
    • 1× Jumper Wire Set (Dupont cables)

    Ready for immediate use with Arduino, ESP32, and other development boards.

    For any questions about your order, shipping, or invoice, feel free to contact store@camthink.ai

    Weight 0.1 kg
    Dimensions 10 × 10 × 5 cm

    Related products