-
Quectel 5G Module – M.2 B-Key, PCIe/USB, GNSS 1 × $248.00 -
Dual-Band Wi-Fi 5 + Bluetooth 5.0 Module 1 × $28.00 -
Raspberry Pi Camera Module HQ Sony IMX477 12MP 1 × $118.00
Subtotal: $394.00
“Raspberry Pi Camera Module HQ Sony IMX477 12MP” has been added to your cart. View cart
NeoEyes NE101 ESP32-S3 Development Board
$29.90
- Ultra-low power. Fully modular. Ready for edge sensing.
- NE100-CM01 Dev Board is a compact, ultra-low-power ESP32-S3-based development board for NeoEyes NE101 Camera.
- Supports event-triggered image capture, modular I/O, and flexible camera and connectivity options for smart sensing applications.
Read More
Overview
The CamThink NE100-CM01 is a highly integrated development board tailored for the NeoEyes NE101 Sensing Camera. Built on the ESP32-S3 ultra-low-power platform, it supports event-based imaging, modular peripherals, and customizable I/O, empowering developers to rapidly prototype AIoT camera solutions across agriculture, security, environment, and edge vision use cases.
Key Features
-
ESP32-S3 MCU
Dual-core processor with 8MB RAM, 16MB Flash, and vector instructions for image processing and ML tasks. -
Flexible Camera Support
-
Compatible with OV5640 module (CSI interface)
-
Optional USB camera support
-
Available in 60°/120° FOV, swappable lenses for near/far focus
-
Event-triggered image capture
-
-
Multi-Connectivity Ready
-
Onboard Wi-Fi 4
-
Optional Cat.1 LTE or Wi-Fi HaLow for long-range, low-power transmission
-
Bluetooth supported for device pairing
-
-
Ultra-Low Power Operation
-
Supports deep sleep mode
-
Sensor-triggered wake-up ensures energy efficiency
-
-
Modular Hardware Design
-
Interchangeable camera, network, and power modules
-
Open hardware for custom expansion
-
-
Developer-Friendly I/O
-
16-pin GPIO expansion
-
USB Type-C for power and debugging
-
TF card slot for local image storage
-
Alarm input and onboard LED support
-
Technical Specifications
| Category | Details |
|---|---|
| MCU | ESP32-S3 (dual-core, with AI acceleration) |
| RAM / Flash | 8MB RAM / 16MB Flash |
| Camera Support | OV5640 module (CSI), optional USB camera |
| FOV Options | 60° or 120° |
| Focal Length Options | 3cm / 4cm / 8cm / 15cm (lens-dependent) |
| Connectivity | Wi-Fi (default), Cat.1 LTE / Wi-Fi HaLow (optional) |
| Bluetooth | Supported |
| Power Supply | USB-C (5V/1A) or 4×AA batteries (6V) — Not Included |
| GPIO | 16-pin expansion interface |
| Storage | Micro TF card slot |
| LED | Supported |
| Operating Temp. | –20°C to +60°C |
| Dimensions | 60 × 60 × 25 mm (PCB only) |
Use Case Scenarios
-
Smart Agriculture
-
Wildlife Monitoring
-
Edge Surveillance
-
Environmental Sensing
-
Industrial IoT Prototyping
What’s in the Box
- NE101-MB01 Carrier Board x1
Q: What camera modules are supported?
A: The board supports OV5640 CSI cameras (60° and 120° FOV) and optional USB cameras.
Q: Can I run it on batteries?
A: Yes, it supports 4×AA batteries or USB-C 5V power input. （Batteries not inclued)
Q: Is it open hardware?
A: Yes. The NE100-CM01 follows a modular open hardware approach—ideal for customization and rapid prototyping.
Q: Does it support image capture on sensor trigger?
A: Yes, event-based image capture is supported via GPIO alarm input or external sensors.
Q: Can I store images locally?
A: Yes, via the TF card slot.
Q: What connectivity expansions are available?
A: Wi-Fi (default), with optional Cat.1 LTE or Wi-Fi HaLow through modular add-ons.
Be the first to review “NeoEyes NE101 ESP32-S3 Development Board”
Related products
-
Wi-Fi HaLow Communication Board (NE101 Only)
$37.00 – $38.00Select options This product has multiple variants. The options may be chosen on the product page -
Raspberry Pi Camera Module V2 – IMX219 Sensor 8MP
$40.00 -
Quectel 4G Module
$60.00 -
Dual-Band Wi-Fi 5 + Bluetooth 5.0 Module
$28.00
Reviews
There are no reviews yet.